Push-Push / Push-Eject Type
Used in applications
where SIM card is plugged/unplugged externally
Receiver/Push In Type
SIM card slots into place and is held by friction.
Micro SIM Connector
Mini UICC and 3ff receiver type SIM connector
2 SIM cards can be inserted into one connector, saving space and cost.
SIM card inserted into hinged cover which locks the SIM card in place when closed.
SIM card is held in place by a cover or moulding holding the card onto the contacts. Suitable for Micro SIM cards (Mini UICC, 3ff)
GradConn manufacture five standard types of SIM connector: Push-push and push-eject SIM connector, Receiver/Push in type SIM connector, Micro SIM connector, Flip/hinged type SIM connector and contact type SIM connector.
SIM Connectors are available in 6 or 8 contacts, with optional PCB locating pegs and metal holdowns.
SIM card connectors are available with a switch to provide card detection information, this adds an extra two contacts. (6+2/ 8+2).
Low profile options: Heights of 0.85mm in contact style, 1.6mm in receiver style and 1.9 mm for the push push SIM connector.
Contact GradConn for a quote or further information on any of the SIM connectors.
GradConn's 8 position SIM connectors are suitable for use in MEGASIM applications, which allows SIM card pins 7 & 8 to be accessed for storage memory.